Ender IDEX

Current dispatch time: 7 days

USD$ 55.55USD$ 290.27

Full Ender IDEX Kit & Files
USD$ 290.27
Digital Product
USD$ 55.55
Clear
SKUN/A Category
Seller: SEN 3D
SEN 3D
Close
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

What's in the File pack?

The file pack and kits with files include:

🗂 STLs for all IDEX kit parts
⬆️ Lifetime updates
💾 10+ Pre-compiled firmwares
🧭 Part Printing Guides
📄 Full documentation
🛒 Bill of Materials
❓ FAQ and upgrade guides
🙋‍♂️ 1to1 Customer support

File Pack Build Video

Kit Build Video

Alternative Kits

From the Ender Extenders to CR-10 to hardware only, there are all kinds of kits to fit your specific needs and build (and if you need something else just drop me an email).

All of the kits below also include the full files pack and customer support.


ThumbnailsProductsPriceQuantityAction
DIY Hardware Only Kit & Files
All of the hardware required to build an Ender IDEX (including screws, nuts and bolts). Only 3D printed parts and basic tools will be needed to build the Ender IDEX machine (and an Ender 3 printer).
USD$ 206.94
Ender 3 V2 IDEX Kit & Files
Stock Ender IDEX kit with the addition of a TFT35 display to replace the V2 screen, forked cable connections screwed directly into the power supply and a replacement X-axis belt tensioner. All other setup is identical to the stock Ender IDEX kit.
USD$ 331.93
Ender Extender 300 IDEX Kit & Files
Stock Ender IDEX kit with additional 470mm X-axis extrusion, longer cables and longer belts. The kit may require some additional choices and adjustments by the user for minor things like preferred motherboard box placement. *does not include Ender 3 or Extender kit itself*
USD$ 311.10
Ender Extender 400 IDEX Kit & Files
Stock Ender IDEX kit with additional 570mm X-axis extrusion, longer cables and longer belts. The kit may require some additional choices and adjustments by the user for minor things like preferred motherboard box placement. *does not include Ender 3 or Extender kit itself*
USD$ 318.04
BETA: Ender IDEX CR-10 24V Kit & Files
A stock Ender IDEX kit with longer 470mm X-axis extrusion. This is currently only compatible with 24V CR-10 printers and an early release. It will require minor work and adjusting by the user for things like Motherboard placement and power supply cabling based on your preferred setup. Full customer support throughout your IDEX journey.
USD$ 290.27
Ender IDEX X-axis Kit & Files
A mini kit including a full hotend 2 carriage, X2 motor component, pulley arm component and pre-drilled extrusion. Additional hardware will be required such as a motherboard, second extruder and cabling to build and Ender IDEX machine.
USD$ 138.88

Individual kit parts

X-Axis Aluminium Extrusion

This is the extrusion used to replace the standard X-axis. It comes cut to the specific size as well as being pre-drilled and tapped ready to install. Perfect if you don’t have access to a drill press.


ThumbnailsProductsPriceQuantityAction
400mm X-axis Extrusion
Suitable for Ender 3, Pro and V2 or similar format printer with a 345mm X-axis. Comes pre-drilled and tapped ready to use.
USD$ 13.89
470mm X-axis Extrusion (Ender Extender 300, Endzilla 300, Ender 3 Max, CR-10)
Longer 470mm 2020 Aluminium extrusion, pre-drilled and tapped ready for the Ender IDEX setup. Suitable for Ender 3 Max, CR-10, Ender Extender and Endzilla 300 kits with a stock X-axis extrusion of 415mm long.
USD$ 18.05
570mm X-axis Extrusion (Ender Extender 400, Endzilla 400)
Longer 570mm 2020 Aluminium extrusion, pre-drilled and tapped ready for the Ender IDEX setup. Suitable for Ender Extender and Endzilla 400 kits with a stock X-axis extrusion of 515mm long.
USD$ 20.83

IDEX Carriage

The custom Ender IDEX carriage can be raised and lowered with a screw. This is vital for duplicate or mirror mode prints with 2 hotends touching the bed at 2 points at the same time.


ThumbnailsProductsPriceQuantityAction
24V Hotend
Includes heater cartridge, thermistor, 1m PTFE tube, silicone sock and PTFE connectors.
USD$ 20.83
ABS Carriage Parts
Carriage base mounted onto the metal carriage plate, hotend mount, belt tensioner and fan housing. All printed in ABS for maximum temperature resistance.
USD$ 27.78
Braided Cable Sleeve (1m)
12mm diameter red braided cable sleeve. Higher quantities will be dispatched as a single continuous piece that can easily be cut as desired.
USD$ 5.56
Complete IDEX Carriage
Carriage includes custom parts, base carriage, hotend, both fans, thermistor, timing belt, tensioned, PTFE and cable sleeve, all fully assembled.
USD$ 55.55
4010 24V Hotend Cooling Fan
Can also be used to replace the hotend cooling fan hot extruder 1.
USD$ 6.94
4010 24V Blower Parts Cooling Fan
Can also replace the parts cooling can for hotend 1.
USD$ 6.94
V-Slot Carriage
USD$ 20.83

Motherboard


ThumbnailsProductsPriceQuantityAction
4010 24V Box Fan
USD$ 6.94
6 x DRV8825 Stepper Drivers
These are the stock stepper drivers in the Ender IDEX kit. Excellent value, performance and reliability. They will also run quieter than standard Ender 3/Pro stepper drivers.
USD$ 13.89
PETG Slim Box & Lid
Standard slim Ender IDEX motherboard box sits perfectly under the Ender 3, Pro & V2.
USD$ 20.83
PETG Lift Box & Lid
Used in conjunction with the printer legs, this box raises the printer up 25mm and enables more space for the motherboard and cabling inside.
USD$ 20.83
SKR Pro V1.2
USD$ 62.50

Cabling

If you are connecting existing Ender 3 parts directly to the motherboard you will not need the extender cables. Only the X2, E2 and X-max endstop cables will be new.


ThumbnailsProductsPriceQuantityAction
Complete Cables Pack
All of the cables used in the full Ender IDEX kit including power, extender cables and complete cables the new stepper motors and endstop.
USD$ 55.55
Ender 3 Extension Cables
Extension cables that move the connectors from the motherboard to the rear of the printer.
USD$ 34.72
New IDEX X2, Extruder 2 and Endstop 2 Cables
95cm cables for the X2 motor, E2 motor and X-max endstop.
USD$ 12.50
Power Cable
Custom Ender IDEX power cable for the SKR Pro. Combines motor, bed and board power into a single 14AWG cable and XT60 connector. Plug and play for the Ender 3 and Pro models. The Ender 3 V2 does not have an XT60 connector so it's advised to connect your power cables directly to the power supply.
USD$ 19.44

Pulley Arm


ThumbnailsProductsPriceQuantityAction
Complete X2 Pulley Arm
The full pulley are setup including endstop switch and timing belt wheel, fully assembled.
USD$ 20.83
Idler Wheel
Enables the X2 belt to freely move around the pulley arm on the right side.
USD$ 4.86
PETG Pulley Arm
Mounts onto the right side of the X-axis holding the X2 belt idler wheel and X-max endstop.
USD$ 15.28
X2 Endstop Switch
Also usable as any other endstop on the Ender 3
USD$ 5.56

X2 Motor


ThumbnailsProductsPriceQuantityAction
Complete X2 Motor
The full X2 motor setup including mount, motor and timing belt wheel, fully assembled.
USD$ 27.78
GT2 6mm Timing Belt (1m)
Suitable for the X1 and X2 axis. Higher quantities will be dispatched as a single continuous piece than can easily be cut as desired.
USD$ 5.56
PETG X2 Motor Mount
Holds the X2 motor just above the existing X-axis motor.
USD$ 15.28
X2 Pulley Wheel
Drives the X2 belt.
USD$ 4.86
X2 Stepper Motor
Nema 17 40mm tall stepper motor, 1.5A rated current.
USD$ 15.28

Extruder


ThumbnailsProductsPriceQuantityAction
Complete Second Extruder
Complete extruder setup for hotend 2 including mount, motor and metal left hand extruder set, fully assembled.
USD$ 25.00
E1 Metal Extruder Kit (Right Hand)
Upgrade your hotend 1 extruder to match hotend 2 in metal with the "right hard" arm to match the stock plastic extruder.
USD$ 11.11
Extruder 2 Stepper Motor
Nema 17 40mm tall stepper motor, 1.5A rated current.
USD$ 15.28
Metal Extruder Kit (Left Hand)
Metal version of the classic Ender 3 extruder with a mirrored "left hand" arm for a symmetrical look.
USD$ 11.11
PETG Extruder Holder
Slides onto the top bar of the printer and holds the extruders either horizontally or vertically depending on your preference.
USD$ 6.94

Other Parts


ThumbnailsProductsPriceQuantityAction
PETG Cable Arm
Installed on the read or the X-axis this cable arm holder the cables out of the way for hotends 1 and 2.
USD$ 8.33
PETG Printer Legs
Used in conjunction with the Motherboard lift box, this set will raise the height of the Ender 3 by 25mm as well as bring the screen forward by 60mm for easier viewing.
USD$ 11.11
PETG Spool Holders (Pair)
Matching pair of left and right spool holders and spool key to hold the 2 together.
USD$ 13.89

Upgrades

These extras can be used to upgrade your Ender IDEX machine even further. All of these options are fully compatible with the Ender IDEX kit and available firmware in the documentation area.


ThumbnailsProductsPriceQuantityAction
6 x TMC2209 Stepper Drivers
Make your Ender IDEX a silent printer with the TMC2209 stepper drivers. Pre-compiled firmware is also downloadable from the files area for the fastest and easiest setup possible. Larger heat sinks mean these stepper drivers will only work with the lift motherboard box and not the slip motherboard box.
USD$ 41.66
Genuine BL Touch Sensor
A genuine BL Touch sensor by Antclabs, perfect for adding Auto Bed Levelling to your Ender IDEX printer. Purchased as an upgrade the cabling will arrive pre-installed.
USD$ 62.50
BTT TFT35 E3 Touch Screen
Add a touch screen interface to your Ender IDEX machine. You can also switch between the classic LCD screen and the new touch interface with ease.
USD$ 55.55